ShenZhen Leap Electronic Co.,Ltd


Can flexible printed circuit be fixed

Author:Luwis zeng Date:5/13/2018 1:09:59 AM
 What is a flexible circuit board

Flexible circuit boards, also known as flexible circuit boards, flexible circuit boards. Abbreviated as FPC or FPC, in contrast to ordinary hard resin circuit boards, the flexible circuit boards have the advantages of high wiring density, light weight, thin thickness, less wiring space restrictions, and high flexibility.

Flexible circuit board characteristics

1, with a high degree of flexibility, three-dimensional wiring, change the shape according to space constraints.

2, resistant to high and low temperature, flame resistant.

3, can be folded without affecting the signal transmission function, to prevent electrostatic interference.

4. Chemical changes are stable, with high stability and reliability.

5, in favor of related product design, can reduce assembly time and errors, and improve the life of the relevant products.

6. Reduce the volume of application products, significantly reduce weight, increase functionality, and reduce costs.

What is a Flexible Circuit Board?

The advantages and disadvantages of flexible circuit boards

The advantages of FPC

A flexible printed circuit board is a printed circuit made of a flexible insulating substrate and has many advantages that a rigid printed circuit board does not have:

(1) It can be freely bent, coiled, and folded. Arbitrary arrangements can be made according to the requirements of space layout, and can be freely moved and retracted in three-dimensional space to achieve integration of component assembly and wire connection;

(2) The use of FPC can greatly reduce the volume and weight of electronic products, and the application of electronic products to high density, miniaturization, and high reliability needs to be developed. Therefore, FPC has been widely used in aerospace, military, mobile communications, laptop computers, computer peripherals, PDAs, digital cameras and other fields or products;

(3) FPC also has the advantages of good heat dissipation and solderability, easy assembly, and low overall cost. The design of soft and hard bonding also compensates for the slight inadequacy of the flexible substrate in component loading capacity.

Disadvantages of FPC

(1) High one-time initial cost: Since the soft PCB is designed and manufactured for special applications, the cost for the initial circuit design, wiring, and photo base is higher. Unless there is a special need to use a soft PCB, it is usually best not to use it when it is used in small quantities.

(2) It is more difficult to change and repair the soft PCB. Once the soft PCB is made, it must be changed from the base diagram or the programmed flash program, so it is not easy to change. The surface is covered with a protective film, which needs to be removed before the repair and restored after the repair. This is a difficult task.

(3) Restricted size: Soft PCBs are usually manufactured using a batch process when they are not yet available. Therefore, they are limited by the size of production equipment and cannot be made very long and wide.

(4) Improper operation and easy damage: Improper operation of the connected personnel may cause damage to the soft circuit. The soldering and rework must be performed by trained personnel.

What is a Flexible Circuit Board?

Types of flexible circuit boards

1、Single panel

After the circuit is completed with a single-sided PI copper clad material, a protective film is applied to form a flexible circuit board with only a single conductor.

2, ordinary double panel

After the double-sided circuit is completed using the double-sided PI board copper-clad board material, a protective film is applied on both sides to become a circuit board with double-layer conductors.

3, substrate generation single panel

The use of pure copper foil material in the circuit manufacturing process adds a protective film on both sides, respectively, to become a circuit board with only a single conductor but conductors exposed on both sides of the circuit board.

4, substrate generation double panel

The two-layer single-sided PI copper-clad board material is pressed together by a bonding adhesive that is used to open a window in a specific position, and becomes a double-sided conductor circuit board that is laminated in a local area and has a two-layer separation structure in a local area to reach the layered area. A circuit board with high flexural performance.

online service

Skype: leappcb 点击这里给我发消息 点击这里给我发消息 点击这里给我发消息